I bought a Rotary Temple from
Fireside Looms some years ago and fitted it to a Leclerc Artisat. I subsequently sold the loom and the temple has been carefully packed away for about ten years.
I have an AVL WDL which I haven't used for about 6 years - I recently took it out of its packaging, gave it a good clean and got it ready to weave again. So that I could move it about I built a wooden dolly which the loom sits on very nicely.
Once the loom was on the dolly it occurred to me that the dolly might make a firm base for a framework to hold the rotary temple. I adopted a "suck it and see" approach to the design, clamping various bits of wood into place until I something that would hold the mounting brackets in the correct position. I screwed and glued it all together, put on the brackets and track and it works. I am still using clips to secure the framework in place until I think of something slightly more elegant.
 |
| Initial mockup with uprights clamped to the loom frame and sitting on the dolly |
 |
| A slightly diferent set up |
 |
| Bracket clamped in place |
 |
| The arrangement had to be different on each side to allow for the ratchet handle |
 |
| Final design - uprights on the left |
 |
| Uprights on the right |
 |
| Upright, bracket, track and temple |
 |
| In use |
